plinth

The basement is the part of the foundation located above the surface of the earth. The most high-quality material for construction is solid and burnt brick. Dry or silicate for the construction of this building is no longer suitable. The basement is located next to the ground and is constantly exposed to atmospheric precipitation, in such an environment only this type of brick will not collapse. The next threat is exposure to moisture from the ground itself. From the ground, it rises through the foundation, already from it it enters the brickwork. At your leisure, it will not be superfluous to find out about affordable prices for door installation.
In order to avoid the negative impact of water, the plinth must be waterproofed without fail with several layers of roofing material. A typical mistake would be to make waterproofing above the basement level, as a result of which it collapses at an accelerated pace. Do not save on protecting the base from moisture. The best option would be to create several protections, one on the foundation and the other on the base.
In order to start laying the plinth, it is necessary to hammer wooden stakes in the corners of the future house a little higher than the level of the plinth. Between them it will be necessary to pull the twine and attach a level to it. Mark points on the stakes with a pencil, then measure the height of the base on the stakes that are in the corners and remove the twine. After that, the twine is pulled over the nails of the cast-off and at the intersection you will get the axis of your building. Plumb them, transferring them to the foundation and mark with a pencil. Then proceed to the direct laying of the basement.